Manual Pump System
video
Manual Pump System

Manual Pump System

Hand pump and working principle of hand pump One way hand oil pump is a small hydraulic pump station which converts manual mechanical energy into hydraulic energy. In the use of supporting cylinders and special tools, can be carried out a variety of operations, such as lifting, bending,...
Send Inquiry
Description

Shandong Yikaide Hydraulic Co., Ltd. is one of the leading manufacturers and suppliers of manual pump system in China. If you're going to buy manual pump system made in China, welcome to get more information from our factory. Also, customized service is available.

 

Hand pump and working principle of hand pump

One way hand oil pump is a small hydraulic pump station which converts manual mechanical energy into hydraulic energy.

In the use of supporting cylinders and special tools, can be carried out a variety of operations, such as lifting, bending, straightening, cutting, riveting, assembly, disassembly and some building construction, military construction.

The main features of the oil pump are: high pressure, manual, ultra-small, easy to carry, simple operation, and wide application range.

The two-way hand pump converts mechanical oil or hydraulic oil into pressure oil through the action of the plunger and becomes a special power source. It has the obvious characteristics of remarkable efficiency, stable performance, safety and reliability, easy to carry, etc. The main technical indicators reach the level of similar foreign products.

The working principle of the manual oil pump can be divided into four processes:

1,filling liquid: When the oil pump starts to work, the oil is pressed into the high and low pressure plunger at the same time

Pressure check valve, through the high and low pressure check valve into the cylinder. When the pressure rises to lMpa, it is low

The pressure oil spills from the low pressure relief valve back to the oil storage pipe.

2, boost pressure: on the basis of the above process. The high pressure plunger continues to work, and the pressure gradually increases. When the pressure exceeds the rated pressure of 63Mpa, the high pressure valve is opened, and the high pressure oil spills back from the high pressure valve to the oil storage pipe, and the pressure is always maintained at 63Mpa. High pressure valves are safety valves.

3. Work; In the working process, due to the work cylinder. The pressure will be reduced, so shake the handle at any time to maintain the required working pressure until the end of the work.

4. Unloading: The oil pump is finished, and the pressure needs to be reduced to zero. Open the discharge valve, oil

The liquid flows back to the oil storage pipe to complete the unloading work. The process of filling oil, boosting pressure and working is actually inseparable. All three processes can be done with a handle. Hand pump and working principle of hand pump

One way hand oil pump is a small hydraulic pump station which converts manual mechanical energy into hydraulic energy.

In the use of supporting cylinders and special tools, can be carried out a variety of operations, such as lifting, bending, straightening, cutting, riveting, assembly, disassembly and some building construction, military construction.

The main features of the oil pump are: high pressure, manual, ultra-small, easy to carry, simple operation, and wide application range.

The two-way hand pump converts mechanical oil or hydraulic oil into pressure oil through the action of the plunger and becomes a special power source. It has the obvious characteristics of remarkable efficiency, stable performance, safety and reliability, easy to carry, etc. The main technical indicators reach the level of similar foreign products.

The working principle of the manual oil pump can be divided into four processes:

 

1, filling liquid: When the oil pump starts to work, the oil is pressed into the high and low pressure plunger at the same time

 

Pressure check valve, through the high and low pressure check valve into the cylinder. When the pressure rises to lMpa, it is low

 

The pressure oil spills from the low pressure relief valve back to the oil storage pipe.

 

2, boost pressure: on the basis of the above process. The high pressure plunger continues to work, and the pressure gradually increases. When the pressure exceeds the rated pressure of 63Mpa, the high pressure valve is opened, and the high pressure oil spills back from the high pressure valve to the oil storage pipe, and the pressure is always maintained at 63Mpa. High pressure valves are safety valves.

 

3. Work; In the working process, due to the work cylinder. The pressure will be reduced, so shake the handle at any time to maintain the required working pressure until the end of the work.

 

4. Unloading: The oil pump is finished, and the pressure needs to be reduced to zero. Open the discharge valve, oil

 

The liquid flows back to the oil storage pipe to complete the unloading work. The process of filling oil, boosting pressure and working is actually inseparable. All three processes can be done with a handle.

Hot Tags: manual pump system, China manual pump system manufacturers, suppliers, factory

Send Inquiry

(0/10)

clearall