helmet
1. Before using the safety helmet, check whether the cap shell, cap lining and cap strap are complete and effective.
2. Adjust the safety helmet lining before using the safety helmet so that each part of the cap liner is separated from the cap shell by a certain space.
3. The hoop should be adjusted according to the shape of the human head to prevent the hat from sliding in front of the hat to block the line of sight when working with the head down.
4. It is strictly forbidden to combine the two layers of top lining of the safety helmet into one layer.
5. The safety helmet should be worn tightly and straight, and the hat strap should be tied under the chin and tightened.
6. The validity period of the safety helmet is calculated from the date of completion of product manufacturing, and the plastic cap shall not exceed two and a half years, and the FRP cap shall not exceed three and a half years.
safety belt
1. The seat belt must be inspected by the inspection unit every six months before it can be used.
2. Wear seat belts when working in the following conditions:
(1) For work that is possible to work at height, you must wear a seat belt when entering the workplace;
(2) When working at height of more than two meters;
(3) When working on scaffolding without scaffolding or without barricades, and the height exceeds 1.5 meters;
(4) When working on a sloping roof;
(5) Flat roofs, when there is no protective fence within 1.2 meters from the roof edge or roof opening;
(6) any suspended platform or workbench;
(7) Any guardrails, paving on incomplete scaffolding;
(8) Near the roof or the ladder near the ground opening;
(9) When there are no reliable fall prevention measures when working at height.
3. How to use seat belts correctly:
(1) To tighten the belt, the waist buckle assembly must be fastened and fastened;
(2) When using the safety belt for suspension operation, the hook cannot be directly hooked on the safety belt rope, but should be hooked on the hanging loop of the safety belt rope;
(3) It is forbidden to hang seat belts on components that are not firm or have sharp angles;
(4) Use the same type of safety belt, and the components cannot be replaced without authorization;
(5) Seat belts that have been severely impacted cannot be used even if their appearance has not changed;
(6) It is strictly forbidden to use safety belts to transfer heavy objects;
(7) The seat belt should be hung in a firm and reliable place above, and the height should not be lower than the waist.
Safety rope
1. In order to ensure that the high-altitude workers always have a safety guarantee during the movement, when carrying out particularly dangerous operations, it is required to tie the safety rope while fastening the safety belt.
2. It is forbidden to use hemp rope as a safety rope.
3. Use a long rope of more than 3 meters to add a buffer.
4. One safety rope cannot be used by two people at the same time.
Differential protector
1. The self-locking device should be checked before use.
2. The hook of the self-locking device should be hung on the metal ring of the seat belt.
3. Self-locking devices that have been severely impacted should be stopped from use.
